Zero-Defect Production during Injection Molding thanks to MOLDEYE INSPECTOR
Each production process requires production control. MOLDEYE INSPECTOR can be addapted to another parts, but the same conditions have to be provided.
EXAMPLE OF QUALITY CONTROL is SHORT SHOTS, when the parts become defective or incomplete. This means that the molten plastic for some reason does not fully occupy the mold cavity or cavities, resulting in a portion where there is no plastic.

MOLDEYE INSPECTOR ensures that defective or incomplete parts are removed from the manufacturing proccess.

In case that you have a question about the quality control, please contact us.


1. Cost effective and adaptive solution
2. No need manipulation
3. Save production space
4. Fast integration
5. Minimum change cycle time
6. Reliable system


In this case the quality control is very broad concept of the system. MOLDEYE INSPECTOR represent modular system, which we have to addapt on product and production demand. The inspection process can be performed only in visible side and it must have the contrast ratio between the part and mold. MOLDEYE INSPECTOR can be addapted to another parts, but the same conditions have to be provided.


In the production process it may happen that the part stays on the mold and in the worst case that can cause damage on the mold.MOLDEYE INSPECTOR resolves sticky part anomalies by stopping the process to prevent further damage and losses.


In this case the MOLDEYE INSPECTOR automatically inspects the position of inserts or quality of the part, while the mold and the empty cavity is ejected. MOLDEYE INSPECTOR prevents stray parts from damaging the mold by performing inspection and position adjustment during ejection.


1. The system operates on reference part
2. Counter Control
3. Adjustable tolerance
4. Display system parameters
5. Ability to control the final reports
6. Various possibilities of working impressions
7. Automatic calibration system
8. Automatic positioning and adjustment of the system
9. Manual positioning system
10. Current detection error on the user interface
11. Closing of individual nests in the event of failure nest